Our kit is designed to be used in several applications around your pool.
Above Ground Pool
First, locate the leak. Use a clean cloth and remove any oil, dirt, or grime from the interior and exterior of the pool.
Repair the inside of the pool first. You don’t have to drain the pool as Flex Tape®can be applied wet or dry, it even works underwater!
Flex Tape is specially formulated with a thick, flexible, rubberized backing that conforms to any shape or object. Remove the backing on your Flex Tape. Just peel, stick, and seal! Please the adhesive side of the Flex Tape directly on the leak on the interior surface. Press down firmly.
You may want to place a piece of wood or hard surface on the exterior to help apply pressure.
Continue pushing directly on the Flex Tape. Press down firmly to remove any creases, folds, or air bubbles. You can use squeegee or a roller to help smooth it out. The secret is pressure and time.
Now repair the outside of the pool using the same process.
By applying Flex Tape on both the interior and exterior, you’ll create a super strong double layer of protection. You pool should now be leak-free and ready to enjoy for years as Flex Tape’s bond increases over time!
Pool Liners
Same as above but without the exterior application.
Tiles
Use your Flex Glue® for repairing or replacing loose or missing tiles. Again, no need to drain your pool. Flex Glue can be applied underwater…it even dries underwater!
Make sure the surface is clean from dirt, oil, and grime.
Remove the cap and peel or puncture the foil cover. Squeeze from the bottom of the tube.
Apply liberally to the non-decorative side of the tile and then push it into place. Apply firm pressure for 10-30 seconds or longer so instant grab can take hold.
Flex Glue cures in 24-48 hours and reaches maximum strength in 7 days. Replace cap to help prevent drying. Store in a cool, dry place.
Now you’re ready to dive into summer!