Our Flood Paste in a Cartridge starts out as a thick paste that can be pushed deep into all types of openings and hard-to-reach areas. It dries to a strong, flexible, rubberized barrier. It seals out water, air, and moisture and remains completely flexible. Once floodwaters recede, our Flood Paste can be easily removed.
Flood Paste in a Cartridge is the primary Flood Protection product and should be used as a base coat for your first layer of protection. The cartridge nozzle allows you to target specific areas that need to be sealed. Use on windows, doors, garage doors, and all types of seams, casings, thresholds, conduits, vents and ducts, keyholes, and more.
When applying our Flood Protection Paste in a Cartridge, always to push the Flood Paste into all seams and openings using a gloved finger, gap filler tool or similar tool. This will help create a watertight seal. A common mistake is not pushing the paste into the opening being sealed. Always be cautious of any sharp objects that may cause injury. For complete instructions go to: flexseal.ca/flood.
Depending on temperature, humidity and thickness of application, Flood Paste will dry to the touch in approximately 2 to 6 hours, and fully cure in approximately 24-48 hours.
Allow product to fully cure before floodwaters arrive. To reuse cartridge, leave a small bead of paste at the tip of the nozzle to create a plug. When reusing, remove plug from the nozzle. Always use fresh material to seal an opening.
Flood Protection Cartridge (9oz): A 1/4" inch bead will cover approximately 21 linear feet.
Always follow state and local weather advisories and evacuation orders. Depending on age and type of construction, there may be areas that can’t be seen or sealed. Unsealed porous surfaces may seep water during extended underwater exposure. Our Flood Protection Products are NOT intended for flash floods, extreme winds or water pressure, to protect against flying or floating debris, or if there is structural damage to the building.
All of our Flood Protection Products are Patent Pending for both products and uses.
Made in the USA with globally sourced materials.
Colour of product is high-visibility yellow.
For more information on UL testing, click here.